Specifications

VX-7R OPERATING MANUAL 71
Selecting the Units of Altitude
1. Press the key, then press the key to enter the Set Mode.
2. Rotate the DIAL to select the Menu Item labeled (Mea-
surements #6: ALTITUDE UNIT).
3. Press the or key to select the preferred unit (m or
ft).
4. Press the PTT key momentarily to save the new setting and exit to normal operation.
Correcting the Altimeter Setting (Altimeter Offset)
1. Press the key, then press the key to enter the Set Mode.
2. Rotate the DIAL to select the Menu Item labeled (Measurements #7: ALTITUDE
OFFSET).
3. Press the key to enable setting of this Menu Item.
4. Press the key to indicate the altimeter data in “m”
units.
5. Press the or key to adjust the VX-7R display to the true altitude at your
current location in “m” units.
6. Press the key to save the new setting.
7. Press the PTT key momentarily to exit to normal operation.
SENSOR MODE OPTIONS
SENSOR MODE