Specifications

VX-7R OPERATING MANUAL 87
SET MODE
Display Setup #7
[
LED COLOR 2
]
Function: Selects the “STROBE” color for each operating status.
Main BUSY: Sets the STROBE color displayed while the squelch is open on the “Main”
band (Default: 1).
Sub BUSY: Sets the STROBE color displayed while the squelch is open on the “Sub”
band (Default: 2).
DUAL BUSY: Sets the STROBE color displayed during Dual Receive operation (De-
fault: 3).
Main TX: Sets the STROBE color displayed while transmitting on the “Main” band
(Default: 4).
Sub TX: Sets the STROBE color displayed while transmitting on the “Sub” band
(Default: 5).
CHG Complete: Set the STROBE color displayed when battery charging is finished (De-
fault: 2).
In this mode, press the key to enable the setting of the “STROBE” color,,
and press the key again to exit from this item. See page 79 for details.
Display Setup #8
[
METER SYMBOL
]
Function: Selects the S- & TX PO meter Symbol.
Available Values: Six patterns
S1:
S2:
S3:
S4:
S5:
CHR:
Default: S1:
The default “ ” symbol which is used for last meter type may be replaced by
several other symbols. See page 76 for details.
TSQ/DCS/DTMF #1
[
SQL TYPE
]
Function: Selects the Tone Encoder and/or Decoder mode.
Available Values: OFF/TONE/TONE SQL/DCS
Default: OFF
TONE: CTCSS Encoder
TONE SQL:CTCSS Encoder/Decoder
DCS: Digital Coded Squelch Encoder/Decoder