Specifications

VX-7R OPERATING MANUAL 91
SET MODE
Measurement #1
[
SENSOR DISPLAY
]
Function: Selects the display of the sensor units’ information.
Available Values: TIME/DC/TEMP/WAVE/BARO/ALTI/WX/OFF
Default: TIME
The barometric pressure (BARO), altitude (ALTI), and Weather (WX) informa-
tion require the optional SU-1.
Measurement #2
[
WAVE MONITOR
]
Function: Select the Wave Form to be monitored.
Available Values: ALL/RX SIGNAL/TX MODULATION
Default: ALL
ALL: Indicates the RX Audio wave form and TX Audio modulation wave
form.
RX SIGNAL: Indicates the RX Audio modulation wave form.
TX MODULATION: Indicates the TX Audio modulation wave form.
Measurement #3
[
TEMP UNIT
]
Function: Selects the measurement units for the Temperature sensor.
Available Values: °C/°F
Default: Depends on the transceiver version
Measurement #4
[
BARO UNIT
]
Function: Selects the measurement units for the Barometric Pressure sensor (requires op-
tional SU-1).
Available Values: hpa/mbar/mmHg/inch
Default: Depends on the transceiver version
Measurement #5
[
BARO OFFSET
]
Function: Correcting the Barometric Pressure (requires optional SU-1). See page 70 for
details.
Measurement #6
[
ALTITUDE UNIT
]
Function: Select the measurement units for the Altimeter (requires optional SU-1).
Available Values: m/ft
Default: Depends on the transceiver version
Measurement #7
[
ALTITUDE OFFSET
]
Function: Correcting the Altimeter (requires optional SU-1). See page 71 for details.
Save Modes #1
[
APO
]
Function: Setting of the Automatic Power-Off time.
Available Values: OFF/30 min/1 hour/3 hours/5 hours/8 hours
Default: OFF