Specifications

VX-7R OPERATING MANUAL92
SET MODE
Save Modes #2
[
RX SAVE
]
Function: Selects the Receive-mode Battery Saver interval (“sleep” ratio).
Available Values: OFF/200mS(1:1)/300mS(1:1.5)/500mS(1:2.5)/1s(1:5)/2s(1:10)
Default: 200mS(1:1)
Save Modes #3
[
TX SAVE
]
Function: Enables/disables the Transmit Battery Saver.
Available Values: ON/OFF
Default: OFF
Save Modes #4
[
TOT
]
Function: Setting of the TOT time.
Available Values: OFF/1 min/2.5 min/5 min/10 min
Default: OFF
The time-out timer shuts off the transmitter after continuous transmission of the programmed
time.
Save Modes #5
[
ON TIMER
]
Function: Set the ON Timer time.
Available Values: OFF/00:00 ~ 23:59
Default: OFF
The ON Timer turns on the radio at the programmed time.
Save Modes #6
[
OFF TIMER
]
Function: Set the OFF Timer time.
Available Values: OFF/00:00 ~ 23:59
Default: OFF
The OFF Timer turns off the radio at the programmed time.
ARTS #1
[
ARTS BEEP
]
Function: Select the Beep option during ARTS operation.
Available Values: IN RANGE/ALWAYS/OFF
Default: IN RANGE
RANGE: Beeps sound only when the radio first detects that you are within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other sta-
tion (every 15 or 25 seconds when in range).
OFF: No alert beeps sound.
ARTS #2
[
ARTS INTERVAL
]
Function: Select the Polling Interval during ARTS operation.
Available Values: 15 SEC/25 SEC
Default: 25 SEC
This setting determines how often the other station will be polled during ARTS operation.