Specifications

VX-3R OPERATING MANUAL 101
MISCELLANEOUS SETTING
CHANGING THE STATUS OF THE
[
VOL
]
KEY
By factory default, the
[
VOL
]
key keeps the status while pressing and holding the
[
VOL
]
key down. You may change the status of the
[
VOL
]
key to keep the status for approxi-
mately three seconds after pressing the
[
VOL
]
key, after which time it reverts back to its
previous status.
1. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item 92:
VOL MDVOL MD
VOL MDVOL MD
VOL MD.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the
[
TXPO
]
key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired mode.
NORMALNORMAL
NORMALNORMAL
NORMAL: The
[
VOL
]
key keeps the status while pressing and
holding the
[
VOL
]
key down.
AUT.BCKAUT.BCK
AUT.BCKAUT.BCK
AUT.BCK: The
[
VOL
]
key keeps its status for approximately
three seconds after pressing the
[
VOL
]
key.
5. When you have made your selection, press the PTT switch to save the new setting and
exit to normal operation.