Specifications

VX-3R OPERATING MANUAL108
Set Mode Item 1
[
ANT AM
]
Function: Select the antenna to be used in the AM Broadcast listening.
Available Values: BAREXT/BARANT
Default: BAREXT
BAREXT: Uses both the internal Bar Antenna and the Rubber Flex Antenna.
BARANT: Uses the internal Bar Antenna only.
The Bar Antenna is directional; rotate the VX-3R for best reception.
Set Mode Item 2
[
ANT FM
]
Function: Select the antenna to be used in the FM Broadcast listening.
Available Values: EXTANT/EARPHO
Default: EXTANT
EXTANT: Uses the Rubber Flex Antenna.
EARPHO: Uses the Earphone Antenna. When receiving a weak signal, reception may be
noisy.
Set Mode Item 3
[
ANT.ATT
]
Function: Enables/Disables the receiver Front-end Attenuator.
Available Values: ON/OFF
Default: OFF
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 4
[
APO
]
Function: Setting of the Automatic Power-Off feature.
Available Values: OFF/0.5H - 12.0H (0.5H/steps)
Default: OFF
Set Mode Item 5
[
ARS
]
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ON/OFF
Default: ON
Set Mode Item 6
[
ARTSBP
]
Function: Selects the Beep option during ARTS™ operation.
Available Values: OFF/IN RNG/ALWAYS
Default: IN RNG
OFF: No alert beeps sound.
IN RNG: Beeps sound only when the radio first detects that you are within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other sta-
tion (every 15 or 25 seconds when in range).
SET
(
MENU
)
M
ODE