Specifications

VX-3R OPERATING MANUAL 109
Set Mode Item 7
[
ARTSIT
]
Function: Selects the Polling Interval during ARTS™ operation.
Available Values: 15SEC/25SEC
Default: 25SEC
Set Mode Item 8
[
BCLO
]
Function: Enables/Disables the Busy Channel Lock-Out feature.
Available Values: ON/OFF
Default: OFF
Set Mode Item 9
[
BEL.RNG
]
Function: Selects the number of Bell ringer repetitions.
Available Values: 1T - 20T/CONT (Continuous ringing)
Default: 1T
Set Mode Item 10
[
BEL.SEL
]
Function: Enables/Disables the Bell ringer function and its sound selection.
Available Values: OFF/BELL/USRBP1/ USRBP2/ USRBP3
Default: OFF
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 11
[
BNK.NAM
]
Function: Stores Alpha-Numeric “Tags” for the Memory Banks.
See page ?? for details.
Set Mode Item 12
[
BP ED
]
Function: Enables/Disables the Band-edge beeper while selecting the frequency by the
DIAL knob.
Available Values: ON/OFF
Default: OFF
Set Mode Item 13
[
BP LVL
]
Function: Adjust the Beep volume level.
Available Values: LVL 1 - LVL 9
Default: LVL 5
Set Mode Item 14
[
BP SEL
]
Function: Enables/Disables the Keypad beeper.
Available Values: OFF/KY+SCN/KEY
Default: KY+SCN
OFF: The Beeper is disabled.
KY+SCN: The beeper sounds when you press a key or when the scanner stops.
KEY: The beeper sounds when you press any key.
SET
(
MENU
)
M
ODE