Specifications

VX-3R OPERATING MANUAL 115
Set Mode Item 44
[
LAMP
]
Function: Selects the LCD/Keypad Lamp mode.
Available Values: KEY 2S - KEY10S/CONT/OFF
Default: KEY 5S (5 seconds)
KEY 2S - KEY10S: Illuminates the LCD/Keypad for the selected time, when any key is
pressed.
CONT: Illuminates the LCD/Keypad continuously.
OFF: Disables the LCD/Keypad illumination
Set Mode Item 45
[
LED LT
]
Function: Illuminates the TX/BUSY indicator. It will glow continuously white (useful as
emergency flashlight at night).
Set Mode Item 46
[
LOCK
]
Function: Selects the Control Locking lockout combination.
Available Values: KEY/PTT/KY(KEY)+PTT
Default: KEY
Set Mode Item 47
[
M/T-CL
]
Function: Selects the function of the MONI switch (just below the PTT switch) function.
Available Values: MONI/T-CALL
Default: Depends on the transceiver version.
MONI: Pressing the MONI switch will over ride the Noise/Tone Squelch, allowing you
to listen for weak (or non-encoded) signals.
T-CALL: Pressing the MONI switch activates a 1750-Hz burst tone, used for repeater
access in many countries (especially in Europe).
Set Mode Item 48
[
MCGAIN
]
Function: Adjust the microphone gain level.
Available Values: LVL 1 - LVL 9
Default: LVL 5
This Set Mode setting affects both internal and external microphones.
Set Mode Item 49
[
MR DSP
]
Function: Toggles the display indication between “frequency” and “Alpha/Numeric” chan-
nel tags.
Available Values: ALPHA/FREQ
Default: FREQ
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
SET
(
MENU
)
M
ODE