Specifications

VX-3R OPERATING MANUAL 121
Set Mode Item 79
[
SQ TYP
]
Function: Selects the Sub Audible Squelch Type.
Available Values: OFF/TONE/TSQL/DCS/RV TN/PR FRQ/PAGER/MESSAGE
Default: OFF
TONE: Activates the CTCSS Encoder
TSQ: Activates the CTCSS Encoder/Decoder
DCS: Activates the Digital Coded Encoder/Decoder
RV TN: Activates the Reverse CTCSS Decoder (Mutes the receiver when matching
tone is received)
PR FRQ: Activates the User programmed Reverse CTCSS Decoder (Mutes the receiver
when the matching tone programmed with Set Mode Item 63:
PR FRGPR FRG
PR FRGPR FRG
PR FRG is
received)
PAGER: Activates the Enhanced Paging & Code Squelch
MESSAGE: Activates the Message feature
Note: 1) This Set Mode Item can select and set the function to each memory channel
individually.
2) See also Set Mode Item 81:
SQSPLTSQSPLT
SQSPLTSQSPLT
SQSPLT regarding additional selections available during
“Split Tone” operation.
Set Mode Item 80
[
SQSMTR
]
Function: Adjusts the Squelch threshold to the S-meter level.
Available Values: OFF/LVL 1 - LVL 8
Default: OFF
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 81
[
SQSPLT
]
Function: Enables/Disables split CTCSS/DCS coding.
Available Values: ON/OFF
Default: OFF
When this Set Mode Item is set to “ON,” you can see the following additional parameters
after the “MESSAGE” parameter while selecting the Set Mode Item 79:
SQ TYPSQ TYP
SQ TYPSQ TYP
SQ TYP.
D CODE: DCS Encode only.
T DCS: Encodes a CTCSS tone and Decodes a DCS code.
D TONE: Encodes a DCS code and Decodes a CTCSS tone.
Select the desired operating mode from the selections shown above.
SET
(
MENU
)
M
ODE