Specifications

VX-3R OPERATING MANUAL26
CHECKING THE REPEATER UPLINK
(
INPUT
)
F
REQUENCY
It often is helpful to be able to check the uplink (input) frequency of a repeater, to see if the
calling station is within direct (“Simplex”) range.
To do this, just press the
[
HM/RV
]
key. You’ll notice that the display
has shifted to the repeater uplink frequency. Press the
[
HM/RV
]
key
again to cause operation to revert to normal monitoring of the re-
peater downlink (output) frequency.
The configuration of this key may be set either to “RV” (for checking the
input frequency of a repeater), or “HM” (for instant switching to the “Home”
channel for the band you are operating on). To change the configuration of
this key, use Set Mode Item 36: HM/RV. See page 111.
REPEATER OPERATION