Specifications

VX-3R OPERATING MANUAL 49
6. To change to another Memory Bank, press the
[
F/W
]
key, then
press the
[
BAND
]
key. Now rotate the DIAL knob to select the
new Memory Bank, then press the
[
BAND
]
key again.
7. To exit from Memory Bank operation, just press the
[
BAND
]
key. The “ ” icon will disappear from the display, that you
are now in the “regular” Memory Recall mode, without utiliza-
tion of the Memory Banks. The memories stored in the various
Banks will remain in those banks. You do not need to store them again.
REMOVING MEMORIES FROM A MEMORY BANK
1. Recall the memory channel to be removed from a Memory Bank.
2. Press and hold the
[
F/W
]
key for one second, then press the
[ ]
key to remove the
memory channel data from the Memory bank.
CHANGING A MEMORY BANK
’
S NAME
You may change the default Memory Bank Names, which are shown on the display while
selecting the Memory Bank your desire.
1. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item labeled 11:
BNK.NAMBNK.NAM
BNK.NAMBNK.NAM
BNK.NAM.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the
[
TXPO
]
key momentarily to enable adjustment of this Set Mode Item.
4. Rotate the DIAL knob to select the memory bank on which you
wish to change a label.
5. Press the
[
TXPO
]
key momentarily to enable changing of the
name tag.
6. Rotate the DIAL knob to select the first digit of the desired label.
7. Press the
[
V/M
]
key to move to the next character.
8. Repeat steps 6 and 7 to program the remaining letters, numbers,
or symbols of the desired label. A total of six characters may be
used in the creation of a label.
9. If you make a mistake, press the
[
BAND
]
key to backspace the
cursor, then re-enter the correct letter, number, or symbol.
10. When you have completed the changes of the label, press the PTT switch to save the
label and exit.
MEMORY MODE
(
REGULAR MEMORY CHANNEL OPERATION
)
MEMORY BANK OPERATION