Specifications

VX-3R OPERATING MANUAL 55
SCANNING
To set the Scan-Restart Delay Time:
1. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 76:
SCN.STRSCN.STR
SCN.STRSCN.STR
SCN.STR.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the
[
TXPO
]
key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired Scan-Restart Delay
Time. Available selections are
100100
100100
100 -
900 MS900 MS
900 MS900 MS
900 MS (100 MS/step)
and
11
11
1 -
10 SEC10 SEC
10 SEC10 SEC
10 SEC (0.5 SEC/step).
5. When you have made your selection, press the PTT switch to save the new setting and
exit to normal operation.
The default condition for this Set Mode Item is “2 SEC.”