Specifications

VX-3R OPERATING MANUAL60
PREFERENTIAL MEMORY SCAN
The VX-3R also allows you to set up a “Preferential Scan List” of channels which you can
“flag” within the memory system. These channels are designated by a blinking “
X
” icon
when you have selected them, one by one, for the Preferential Scan List.
When you initiate memory scanning, the scan begins on a channel with the blinking “
X
”
icon appended; only those channels bearing the blinking “
X
” icon will be scanned. If you
initiate scanning on a channel that does not have the blinking “
X
” icon appended, you will
scan all channels including those with the blinking “
X
” icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1. Recall the Memory Channel, which you wish to add to the Preferential Scan List.
2. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
3. Rotate the DIAL knob to select Set Mode Item 54:
MRSKIPMRSKIP
MRSKIPMRSKIP
MRSKIP.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
4. Press the
[
TXPO
]
key momentarily to enable adjustment of this
Set Mode Item.
5. Rotate the DIAL knob to select “
ONLYONLY
ONLYONLY
ONLY.”
6. When you have made your selection, press the PTT switch to
save the settings and exit to normal operation.
To initiate Preferential Memory Scan:
1. Press the
[
V/M
]
key momentarily to enter the Memory Recall mode, if you are not
using memories already.
2. Rotate the DIAL to select any channel which has a blinking “
X
”
icon appended to the channel number.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press and hold in the
[
BAND
]
key for one second, and rotate the
DIAL knob while holding in the
[
BAND
]
key, to select the de-
sired Memory Scan mo2de.
ALL CHALL CH
ALL CHALL CH
ALL CH: The scanner sweeps all Memory channels.
TAG1TAG1
TAG1TAG1
TAG1: The scanner sweeps only those Memory channels with the same first digit of
the alpha/numeric tag as the first channel on which scanning started.
TAG2TAG2
TAG2TAG2
TAG2: The scanner sweeps only those Memory channels with the same first and sec-
ond digits of the alpha/numeric tag as the first channel on which scanning started.
BANDBAND
BANDBAND
BAND: The scanner sweeps only those Memory channels which are memorized on
the same operating band as the first channel on which scanning started.
PMS-XPMS-X
PMS-XPMS-X
PMS-X: The scanner will sweep frequencies within the currently-selected PMS fre-
SCANNING
MEMORY SCANNING