Specifications

VX-3R OPERATING MANUAL76
Selecting the EAI mode and its Transmit Time
1. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 31:
EAI.TMREAI.TMR
EAI.TMREAI.TMR
EAI.TMR.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the
[
TXPO
]
key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired EAI mode (Interval
EAI “
INTINT
INTINT
INT” or Continuous EAI “
CONCON
CONCON
CON”) and transmit time (
11
11
1-
1010
1010
10,
1515
1515
15,
2020
2020
20,
3030
3030
30,
4040
4040
40, and 50 minutes).
5. Press the PTT switch to save the new setting and exit to normal operation.
ACTIVATING THE EAI FEATURE
1. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 30:
EAIEAI
EAIEAI
EAI.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the
[
TXPO
]
key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select “
ONON
ONON
ON” (thus activating the EAI
feature).
5. Press the PTT switch to save the new setting and exit to normal operation (with EAI
feature “ON”).
When the EAI feature is activated, the “
EAIEAI
EAIEAI
EAI” notation and the Band
Number (or memory channel number) will appear alternately in the
Memory Channel Number Display Slot of the display.
To disable the EAI feature, just repeat above procedure, rotating the DIAL knob to select
“
OFFOFF
OFFOFF
OFF” in step “4” above.
The VX-3R will ignore the EAI feature when the (1) the squelch is open, (2)
there is an incoming signal on the operating frequency, (3) the operating
frequency is the same as the frequency which is stored in the Memory Chan-
nel “EAI,” or (4) a VHF frequency is stored in Memory Channel “EAI.”
EMERGENCY AUTOMATIC ID
(
EAI
)
FEATURE
EMERGENCY FEATURE