Specifications

VX-3R OPERATING MANUAL 87
The speed at which the DTMF digits are sent can be changed. Two speed levels are avail-
able: Low (10 digits per second) and High (20 digits per second: default). To toggle be-
tween Low and High speed, use the following procedure:
1. Press and hold the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 29:
DT SPDDT SPD
DT SPDDT SPD
DT SPD.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the
[
TXPO
]
key to enable adjustment of this Set Mode
Item.
4. Rotate the DIAL knob to select the desired speed (“
50MS50MS
50MS50MS
50MS”: High
speed or “
100 MS100 MS
100 MS100 MS
100 MS”: Low speed).
5. Press the PTT switch to save the new setting and exit to normal operation.
You can also set a longer delay between the time your transmitter is keyed and the first
DTMF digit is sent. To set the delay time, use the following procedure:
1. Press and hold the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 27:
DT DLYDT DLY
DT DLYDT DLY
DT DLY.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the
[
TXPO
]
key to enable adjustment of this Set Mode
Item.
4. Rotate the DIAL knob to select the desired delay (
5050
5050
50/
250250
250250
250/
450450
450450
450/
750750
750750
750/
1000MS1000MS
1000MS1000MS
1000MS).
5. Press the PTT switch to save the new setting and exit to normal operation.
DTMF AUTODIALER
DTMF OPERATION