Specifications

VX-8DR/DE OPERATING MANUAL154
SET MODE ITEM 69: PASSWORD
Function: Programming and activating the Password feature.
See page 122 for details.
SET MODE ITEM 70: PR FREQUENCY
Function: Program the CTCSS Tone Frequency for the User Programmed Reverse CTCSS
Decoder.
Available Values: 300 Hz ~ 3000 Hz (100 Hz/step)
Default: 1600 Hz
SET MODE ITEM 71: PRI REVERT
Function: Enables/Disables the Priority Revert feature.
Available Values: ON / OFF
Default: OFF
SET MODE ITEM 72: PRI TIME
Function: Selects the time between the Priority (Dual Watch) channel checks, when the
feature is active.
Available Values: 0.1sec ~ 0.9sec (0.1sec/step) or 1.0sec ~ 10.0sec (0.5sec/step)
Default: 5.0sec
SET MODE ITEM 73: PTT DELAY
Function: Selects the time delay before the carrier is transmitted, when the PTT switch is
pressed.
Available Values: OFF / 20ms / 50ms / 100ms / 200ms
Default: OFF
SET MODE ITEM 74: RPT ARS
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ON / OFF
Default: ON
SET MODE ITEM 75: RPT SHIFT
Function: Sets the Repeater Shift Direction.
Available Values: SIMPLEX / –RPT / +RPT
Default: SIMPLEX
SET MODE ITEM 76: RPT SHIFT FREQ
Function: Sets the magnitude of the Repeater Shift.
Available Values: 0.000MHz ~ 150.000MHz (50 kHz/step)
Default: Depends on the operating band and transceiver version.
SET MODE
SET MODE SELECTION DETAILS