Operation Manual

22
VX-920 SerieS Operating Manual
aDVanCeD operation
Description of Operating Functions
monitor
Press the assigned programmable key to cancel
CTCSS- and DCS-controlled squelch; the
BUSY/TX
indicator will glow green. Press and hold this button
for 1.5 seconds to hear background noise (unmute the
audio); the
BUSY/TX
indicator will blink green.
lamp
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to illuminate
the LCD for ve seconds.
sCan
The Scanning feature is used to monitor multiple sig-
nals programmed into the transceiver. While scanning,
the transceiver will check each channel for the pres-
ence of a signal, and will stop on a channel if a signal
is present.
To activate scanning:
r
Press the assigned programmable key, or set the
TOGGLE
switch to the assigned position to acti-
vate scanning.
r
The scanner will search the channels of each
channel, looking for active ones; it will pause
each time it nds a channel on which someone is
speaking.
r
Press the assigned programmable key again, or
set the
TOGGLE
switch to a different position to
disable scanning. Operation will revert to the pro-
grammed revert channel.
Note: Your dealer may have programmed your radio
to stay on one of the following channels if you press
the
PTT
switch during scanning pause:
o
Current channel (“Talk Back”)
o
“Last Busy” channel
o
“Priority” channel
o
“Home” channel
o
“Scan Start” channel