Operation Manual

27
VX-920 SerieS Operating Manual
Call 1 to Call 5
Press the assigned programmable key to send a
2-tone/5-tone sequential tone group which is pre-
dened.
CoDe up/DoWn
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to select a
2-tone/5-tone encode code from the pre-defined en-
code list.
CoDe set
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to change the
encode digits for 5-tone operation. To change a spe-
cic digit, select the desired digit using the
[
A
]
key,
then change the number using the
[
B
]
/
[
C
]
keys, and
store the number using the
[
D
]
key.
speeD Dial
(
16-Key Version only
)
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the assigned programmable
key, then press the front panel’s numeric key corre-
sponding to the Auto-Dial memory number list pro-
vided by your Dealer or Network Administrator. The
DTMF tones sent during the dialing sequence will be
heard in the speaker.
aDVanCeD operation
option sW1
Press the assigned programmable key to toggle the
optional accessory “1” “On” and “Off”.
option sW2
Press the assigned programmable key to toggle the
optional accessory “2” “On” and “Off”.
emergenCy
The
VX-920
series include an “Emergency” feature
which may be useful for alerting another party moni-
toring on the same frequency as your transceiver’s
channel.
Press the assigned programmable key to initiate an
emergency call. For further details contact your Dealer.
home
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to recall the
pre-dened Home group/channel. When you recall the
Home group/channel, the “ ” notation will appear
on the LCD.
seleCtaBle tone
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-dened tone
table. You can operate using the indicated sub-audible
tone in the Selectable Tone mode.