Operation Manual
28
VX-920 SerieS Operating Manual
DireCt Ch#1 - #4
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to recall the
Dealer pre-programmed channel directly.
reC/play
(
VoiCe storage: requires the DVs-5
)
This function allows your radio to record a received
voice message, and to play back the recorded audio. It
requires installation of the optional Voice Recording
Unit.
Recording;
Press the assigned programmable key for 1.5 seconds
to enable the Voice Recording Mode. If the incoming
signal is received, so as to un-mute the squelch and
pass audio, the received audio will be recorded.
In the 16-key and 4-key versions, the “ ” Icon will
ash while recording and the “ ” stays on when the
voice recording is completed.
Playback;
Press the assigned programmable key momentarily to
play back the last message.
To stop the play-back, press the
TOP SEL
key.
In the 16-key and 4-key versions, while playback is
proceeding, you may press the
[
A
]
key (4-key ver-
sion) or
[
Ý
]
key (16-key version) to jump to the pre-
vious message, or press the
[
B
]
key (4-key version) or
aDVanCeD operation
[
#
]
key (16-key version) to jump to the next message.
Furthermore, press the
[
D
]
key to clear the all mes-
sages and stop the play-back.
sql
(
16-Key & 4-Key Version only
)
You can manually adjust the squelch level using this
function:
r
Press the assigned programmable key. A tone will
sound, and the current squelch level will appear
on the display.
r
Press the
MONITOR/LAMP
button to select the
desired squelch level.
r
Two seconds after releasing the
MONITOR/
LAMP
button, the display will revert to the nor-
mal channel indication.
af min Vr
Press the assigned programmable key to reduce the
audio output to the (lower) level programmed by your
Dealer.
status set
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to change the
5-Tone status code. To change the status code, select
the desired digit by
[
A
]
key, then change the number
by
[
B
]
/
[
C
]
key, and store the number by
[
D
]
key.