Operation Manual

29
VX-920 SerieS Operating Manual
aDVanCeD operation
status up/DoWn
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to select a
5-Tone status code from the pre-dened status list.
status CheCK
(
16-Key & 4-Key Version only
)
Press the assigned programmable key to check the
5-Tone receive status code. When you press this key,
the LCD display will indicate the “Message” corre-
sponding to the receive status condition per the pre-
dened status list.
lone WorKer
Press the assigned programmable key to toggle the
Lone Worker feature “On” and “Off”. The Lone
Worker feature is designed to emit an alarm for 30
seconds when the Lone Worker Timer (programmed
by your Dealer) has expired. If the user does not re-
set the timer by pressing the
PTT
switch, the radio
switches to the Emergency mode.
Dtmf CoDe set
(
16-Key Version only
)
You may send the desired telephone number manually.
To dial a number manually, press the assigned program-
mable key, then press the desired numbers on the front
panel’s numeric key. Now, press the
PTT
switch to
send the telephone number. The DTMF tones sent dur-
ing the dialing sequence will be heard in the speaker.
ta sCan
Press the assigned programmable key to toggle the TA
(Talk Around) scan feature “On” and “Off”.
While TA scan is proceeding, the
VX-920
will search
both the transmit and receive frequencies (In the 16-
key and 4-key versions, the “ ” icon will blink).
When a signal is encountered on the receive frequen-
cy, the
VX-920
will pause until the signal disappears
(“ ” icon will appear but not blink). When a signal is
encountered on the transmit frequency, the
VX-920
will check for activity on the receive frequency every
few seconds (interval programmed by your Dealer).
priority DisaBle
Press the assigned Programmable key to disable the
Priority feature temporarily. Again press the assigned
Programmable key to resume the Priority feature.
Beep on/off
Press the assigned Programmable key to disable the
radio beeps temporarily. Again press the assigned Pro-
grammable key to enable the radio beeps.