User`s guide

AutoTune™ for VX-P820/P920 Rev. C
13
Table 5-16. Sub Audio Deviation Alignment Results.
5.6.2. Test
The radio is set to Test Channel 4 and commanded to transmit by the software. The
analyzer then samples the radio’s sub audio deviation. If the sampled deviation falls
within the Sub Audio Deviation test limit range for the deviation point under test as
described in APPENDIX C, the test is marked as pass. Otherwise, the test is marked as
fail.
The following radio test report results are returned for the Sub Audio Deviation test:
Name Description
Result Pass or Fail. This indicates whether the alignment succeeded in bringing the radio
parameter into alignment limits as specified in the limits file.
Name Maximum Deviation point under test.
Frequency Band center frequency for the radio under test.
Max Limit Maximum passable deviation, inclusive, as specified in the limits file.
Deviation Measured deviation after alignment.
Min Limit Minimum passable deviation, inclusive, as specified in the limits file.
Softpot Current radio parameter softpot value.
Table 5-17. Sub Audio Deviation Test Results.