Owner`s manual

- 6 -
CHAPTER 1: Getting Started
Your Vertex Illumina SR will include the following components:
l Illuminaxture
l Mean Well Driver(s) and their respective power cables:
l SR 300-600 includes one Driver and Power Cable
l SR 900-1200 includes two Drivers and two Power Cables
l SR 1500-1800 includes three Drivers and three Power Cables
l Vertex Illumina Splitter Box (900, 1200, 1500 & 1800 models only)
l Suspension Kit containing:
l Two ~200 cm / ~80” Aircraft Cable
l Two light-mounted Cable Clamp Fittings (w/ Rubber Retaining Gaskets)
l Two ceiling-mounted Socket Anchors
Out of the Box
Your Vertex Illumina SR will come out of the box with the main body preassembled. You will not be re-
quired to install any LED Pads or electronics. Do not attempt to open your Illumina SR. Any installations
requiringdisassemblyofthextureshouldonlybedonebyanauthorizedVertexdealer.
UponremovingyourVertexIlluminafromitspackage,examinethextureandallofitscomponentsfor
any damages. After carefully inspecting the components and reading this guide, you will ready to begin
installation.
Components
Note:Pleasetakethefollowinginstructionintoconsiderationbeforeattemptingtooperateyourxture.
WhenattemptingtoconnectthepowercablestoeachoftheMeanWellDrivers,ensurethatthet-
tingsformarmunion.DO NOT CONNECT THE FIXTURE CABLE TO THE SPLITTER BOX YET.
1. Plug each of the power cables into a GFCI/Surge Protected electrical outlet.
2.ConnecttheMeanWellDriverstotheVertexIlluminaSplitterBox,ensuringrmunion.
3.PlugtheIlluminaxturecabletotheSplitterBox.ThislaststepwillactivateyourIlluminaand
ready it for programming.