- Comdial Speakerphone Reference Manual 8312S, 8324S, 8324F

9.2 Storing Speed Dial Numbers
• To store an outside number as a speed dial number, follow the
display prompts and proceed as follows:
NOTE: Programming overwrites existing speed dial numbers at button
locations.
1. Press OPTIONS.
2. Press NEXT until SDIAL option appears.
3. Press SDIAL to choose speed dial programming.
4. Press programmable button or dial pad button (0–9) to choose
storage location (remember, to access second level storage at a
programmable button, press SHIFT first).
5. Make your speed dial route selection choice from the following
list:
•
press line button to select outside line,
•
dial 00 to select prime line or last line used,
•
dial 01–16 to select line group,
•
press INTERCOM button or dial 8 to select intercom.
6. Dial number (up to 16 digits long—include ✳ and # if needed).
NOTE: You may need a pause between numbers to compensate for
differences in response time between your system and the host
system (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host
system that needs a hookflash to access a feature, press TAP to
store a hookflash, then continue dialing.
If you need to erase the typed digits appearing in your display
to correct them, press BKSP once for each digit to be removed.
7. Press SAVE to store the number.
8. Press next location button and store next number, repeat previous
steps until all numbers are stored,
—OR—
press EXIT.
10. Press SPEAKER to end.
GCA70–250 Programming Your Telephone
LCD Speakerphone Reference Manual 9 – 3