- Comdial Reference Manual Telephone 8412F, 8412S

7.25 Using The IMIST Module
Impact SCS 8412F-**, and 8412S-** speakerphones equipped with the
optional IMIST module can support an IST device (modem, FAX
machine, industry-standard telephone, etc.) in addition to the LCD
speakerphone. Depending on system programming, the IST device may
be used to make outgoing calls and receive incoming calls.
The functionality of the IMIST module depends on the type of system
you are using.
•
The IMIST module will function on a DXP system with the
appropriate digital station board, but the IMIST module will not
have its own extension number and will not function
simultaneously with the speakerphone.
•
On a DXP Plus system, the IMIST module will function
simultaneously with the speakerphone and have its own
extension number if your system has the appropriate digital
station board and memory board. If your system does not have
the optional enhanced memory board, the IMIST module will
function like the one on the DXP system described above.
•
On an FX Series system, the speakerphone and IMIST module
can function simultaneously and the IMIST module has its own
extension number.
NOTE: The IMIST module does not provide voltage to light a message
waiting light. Message waiting lights on devices plugged into
the IMIST module will not function.
If you have any other questions about IST devices, refer to GCA70–237,
Industry-Standard Telephone Station User’s Guide.
NOTE: The IMIST module has a separate power supply. The wall
transformer is a UL and CSA approved Class 2 device
operating from 120 Vac, 60 Hz, 16 watts and provides an
output of 24 Vac at 450 mA. For replacement, order Comdial
P/N DIU-PTR.
Large Screen Speakerphone Manual 7 – 29
GCA70–349 Using The Other Telephone Features
IST Device
Power
scs05
IMIST Module