- Comdial OWNERS MANUAL Speakerphone DXP, DXP, FXS, and FXT

Setting Volume Levels
The volume control on your telephone is a multipurpose
control you can use to set the volume (loudness) of the
ringer, the speaker, and the handset. There are four ringer
loudness levels (plus an off position).
•
To set the ringer loudness level,
1. While your telephone is on-hook and idle,
PRESS the VOLUME UP OR VOLUME DOWN
button once for each change in loudness you
desire. The ringer sounds once for each
change as an example of the current setting.
2. SELECT SAVE to end.
NOTE: If you set the ringer to the
OFF
position, your telephone sounds a
short ring burst once for each call you receive at your station.
•
To set the speaker and handset
loudness levels,
1. PRESS INTERCOM button.
2. PRESS the VOLUME UP OR VOLUME DOWN
button once for each change in speaker
volume that you desire.
3. SELECT
SAVE.
4. LIFT handset.
5. PRESS the VOLUME UP OR VOLUME DOWN
button once for each change in handset
volume that you desire.
6. SELECT
SAVE
.
NOTE: When a call ends, the system resets the speaker and handset volume
of all future calls to the programmed setting. For instructions in setting your
speakerphone’s default volume, see Volume Control section in the system
specific Other Advanced Features chapter on page 78.
Large Screen Display Speakerphone Station User’s Guide 5
Getting Started GCA70-349
Ringer Volume
()
PREV
NEXTEXIT
SAVE