User`s guide

Sending And Receiving Non-Verbal Messages
90 Comdial Jun ‘02
To turn off the message waiting light at a busy or idle station,
1. lift the handset and press Talk (if necessary),
2. press the intercom button (if necessary),
3. dial # 3, and
4. dial the extension number of station that was alerted. The mes-
sage-waiting light of the called station will turn off.
To turn off the message-waiting light when you are either delivering
or receiving a message:
• press the intercom button.
Note: Only the person who sent the message and the person receiving
the message can turn the indicator off.
To receive a message at your station:
1. observe the flashing message-waiting icon and the LCD mes-
sage indicating who called for you,
2. press the intercom button, and
3. press Hold (the system automatically connects you to the mes-
saging station).
9.2 Sending LCD Messages
You can set system-supplied messages at your station to be received
and displayed by a calling LCD speakerphone. These messages give
the caller information on your telephone status.
Get a list of the
available messages from the attendant and write them on the blank
chart on the next page.
To turn on a message from your telephone:
1. lift the handset and press Talk (if necessary),
2. press the intercom button (if necessary),
3. dial * 0 2,
4. press # to clear the current message if one is stored, and