User`s guide

Programming Your Telephone
98 Comdial Jun ‘02
dial 01-16 to select line group,
dial number (up to 16 digits long—include * and # if needed),
Note: You may need a pause between numbers to compensate
for differences in response time between your system and the
host system (ask your attendant about this). To store a pause,
press Hold, then continue dialing.
If your system is behind a
host system that needs a hookflash to access a feature, press
Tap to store a hookflash, then continue dialing.
6. press T/C to store the number,
7. press next location button and store next number,
8. repeat previous steps until all numbers are stored,
or,
press Talk to end.
Note: Storing a new speed dial number at a button location over-
writes an existing speed dial number already stored there.
10.3 Programming DSS Numbers
To store an intercom number as a DSS number,
1. lift handset and press Talk (if necessary),
2. press intercom button (if necessary),
3. dial * * 3,
4. press function button or dial pad button to choose storage loca-
tion,
5. dial extension number,
6. press next location button and store next DSS number,
7. repeat the previous step until all DSS numbers are stored,
or,
press Talk to end.