User`s guide

Placing Calls On Hold
66 Comdial Jun ‘02
6.3 Parking Calls
You can place a call on hold in the system so that it can be answered
from any station that does not have line appearance for the call. You
accomplish this by placing the call in one of ninety park orbits, where
the call remains until it is answered. If the call is not answered within
a specified period of time, the system will send it back to your station
for service (this is known as a park recall).
When you press a personal or group intercom button and dial a code
to retrieve a parked call, the system removes it from the park orbit and
places it at your station on the intercom that you selected.
To park a call in orbit,
1. while on the call, press intercom button,
2. press *
3. dial code for park orbit (910 - 999 for orbits 10-99),
4. remember the code for later use or make it known to those who
need to know it in order to retrieve the call.
To retrieve a call that was placed on hold in the system (parked),
1. lift handset and press Talk (if necessary),
2. press intercom button (if necessary),
3. press #,
4. dial code for orbit (910 - 999 for orbits 10 - 99).
6.4 Handling Park Recalls
When a parked call “times out” of the system, it will return to your
telephone in the form of a park recall (you will hear four short tone
bursts at 12-second intervals). Your display will indicate that the call
is a park recall and will identify the orbit from which the recall origi
-
nated.