User`s guide

Scout II User’s Guide
Jun ‘02 Comdial 81
To override a DND condition at another telephone,
1. make intercom call and hear DND tone,
2. dial * 0 3 (called party will hear several short tone bursts),
3. wait for a reply.
8.12 Setting the Volume Controls
Your telephone has a push-button volume control. This is a multi-
purpose control that you can use to:
• change the handset volume during a call. There are four handset
loudness levels (and four levels on the optional headset as well).
• set the ringer loudness and tone types while in standby mode.
There are two ringer loudness levels, and three different tone
types plus a vibrator position.
CAUTION
Remember, your telephone has a power
saving feature that turns off the display after
a short period of time. Be sure that you do not set and
forget a DND condition. If you do, the blanked display will
hide the displayed DND reminder from your view thus leaving
your telephone in DND mode without any visible reference.