Programming instructions

/M/66-123
BXP Pius Programming Instructions
7.2.3
Class Of Service
Description:
Programming:
You can assign a group of preprogrammed class of service station features to a station. The
system makes up to 32 different classes of service available, and you can program the feature
values differently in each one.
1~ Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Type desired value for feature and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
7.2.4 Si2eed Dial Sets
Description:
A speed dial set is a group of 10 speed dial locations. The system allocates three speed dial sets
to each telephone as a default but you can allocate up to 10 sets to a telephone if you wish.
When a DSS5LF console is operated as a companion to a telephone, you can allocate speed
dial sets at the companion telephone that the system will then share with the console. The
system reserves one speed dial set for the telephone’s dial pad buttons &9. For other speed dial
considerations, see Section 6.6.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Type desired value for feature and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
7-34 Station Features Pr63gramming
..-