Programming instructions

DXP Plus Programming Instructions
lMl66-123
7.2.9
Tone Or Voice Signalling (Tone First)
Description:
Intercom calls are either tone or voice signalled as a first choice with the other mode available
as a second choice. Use this procedure to select the first choice in intercom signalling on a per
station basis.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Press SPACE BAR for feature value and press ENTER,
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
7.2. IO Call Announce Beeps (Call Announce Tone Bursts)
Description:
You can set the number of call announce tone bursts to be a value of from one to five and you
can do this for each station in the system.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select station and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name
for station you wish to program and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Type choice (l-5) and press ENTER.
7. Press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-9 for each station or press ESCAPE to end.
Station Features Programming 7-39