Programming instructions

7.2.13
Flexible Ringing Assignments
Program ringing assignments on a per station/per line/per intercom number basis.
Ringing can be immediate,
delayed, or special purpose. Use the procedures in this section to customize the ringing features for the system. If
needed, use the Section 6.10.7 procedure to arrange for a relay to track the ringing of the direct, delayed, day 1,
day 2, or night ringing modes (use Section 6.9.18 to program these ringing modes). plus, if your installer connects
customer-supplied external paging equipment to the system’s external paging port, use the Section 6.10.9
procedure to arrange for that equipment to sound the ring signal of any or all lines.
Direct Ringing
Description: Use this procedure to choose the line ports that you want to ring at a station as soon as a call
appears. Direct ringing sounds during the day 1 and day 2 time periods but does not ring during
the night ringing mode or during the manual night transfer (of ringing) operation.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type the item number for feature and press ENTER.
6. Press CONTROL E for edit.
7. Type a for add or r for remove and press ENTER.
8. Type line port number l-240 (type as n,nn,nnn or n-nnn) and press ENTER.
9. When finished, press ESCAPE twice.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11 Repeat steps 4-10 for each station or press ESCAPE to end.
Delayed Ringing
Description:
Use this procedure to choose the line ports that you want to ring at a station after waiting a short
time period from when a call appears. Delayed ringing sounds during day 1, day 2 time periods,
during the night ringing mode, and during the manual night transfer (of ringing) operation.
Programming: 1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Press CONTROL E.
7. Type a for add or r for remove and press ENTER.
8. Type line port number l-240 (type as n,nn,nnn or n-nnn) and press ENTER.
9. When finished, press ESCAPE twice.
7-42 Station Features Programming