Programming instructions

Personalized Ringing Tone
Description:
Program a station to ring in one of several distinctive tones for proprietary digital telephones
and in one of four distinctive tones for analog telephones. While industry-standard telephones
do not provide personalized ringing, you can set distinctive ringing for them using the Section
7.2.35 procedure.
Programming:
1~ Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From the station programming menu, type item number for feature and press ENTER.
6. Type ring tone choice and press ENTER.
7. When finished, press ESCAPE twice.
8.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
Operation:
INTERCOM +k +k 4 then dial ring code (l-8)
7.2.14
LCD Contrast (Digital Telephones - Only)
Description:
Adjust the intensity of the display on digital LCD speakerphones with this procedure. The user
can also change the display contrast at his or her telephone using instructions provided in the
system user’s guide.
Programming: 1 a Press CONTROL T for main menu.
2. From main menu, select station and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Type l-8 and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
Operation: INTERCOM +k +& 5 l-58
7-46 Station Features Prcqamrnin$y