Programming instructions

/M/66-123
DXP Plus Programming Insfrwetions
7.2.20 Pick-L/x, Grcxms
Description.=
Use this procedure to place a number of stations in a call pick-up group so that one station can
answer a call ringing at any other station in the group.
Programming:
1 D Press CONTROL T for main menu.
2. From the main menu, select stations and press ENTER.
3. From the stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Type desired value for feature (1-16 = groups l-16,0 = no group) and press ENTER.
7. When finished, press ESCAPE twice.
8.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
Operation: INTERCOM # 4
7.2.21 Thru-Dialing (Through Dialing)
Description:
This procedure allows DTMF tones that are generated by an external device connected to the
system through necessary interface equipment to pass through the system and out to any line
connection.
Programming: 1 e
Press CONTROL T for main menu.
2.
From main menu, select station and press ENTER.
3.
From station menu, select station programming and press ENTER.
4.
Type personal intercom number or previously assigned name of station being programmed
and press ENTER.
5.
From station programming menu, type item number for feature and press ENTER.
6.
Press SPACE bar for desired setting and press ENTER.
7.
When finished, press ESCAPE twice.
8.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9 . Repeat steps 4-8 level for each station or press ESCAPE to end.
7-50 Station Featwres Programming