Programming instructions
7.2.22
Single Line TAP
(Single Line Proprietary Telephone TAP Button)
Description:
Use this procedure to set the function of the TAP button on single line proprietary telephones.
Programming:
1.
Press CONTROL T for main menu.
2.
From main menu, select station and press ENTER.
3.
From station menu, select station programming and press ENTER.
4.
Type personal intercom number or previously assigned name of station being programmed
and press ENTER.
5.
From station programming menu, type item number for feature and press ENTER.
6.
Press SPACE bar for desired setting and press ENTER.
7.
When finished, press ESCAPE twice.
8.
Type y to accept changes,
n
to reject them, or r to resume editing and press ENTER.
10. Repeat steps 4-8 level for each station or press ESCAPE to end.
7.2.23
Ringing On Busy
(Enhanced Subdued Ringing)
Description:
When a telephone is busy on a call and another call comes to that telephone, the system subdues
the ringing of the second call to a lower volume but allows the call to continue to ring at this
subdued volume until the caller abandons it. The system shortens the ringing of another call to
model
8024S,
8124S,
8012S,
and 8112s speakerphones that are busy in the speakerphone mode
to one quick tone burst; however, if these telephones are busy in an off-hook manner
(non-speakerphone mode), the system still subdues the ringing of the second call to a lower
volume and allows the call to continue to ring at this subdued volume until the caller abandons
the call.
If a user does not wish to hear subdued ringing while he or she is busy on a call (even the one
quick tone burst on those particular models that provide it) you can take this programming
action to eliminate all ringing by a second call.
Programming:
1~
Press CONTROL T to return to the main menu.
2.
From main menu, select stations and press ENTER.
3.
From stations menu, select station programming and press ENTER.
4.
Type the personal intercom number or the previously assigned name and press ENTER.
5.
From station programming menu, type the item number for feature and press ENTER.
6.
Press SPACE BAR to eliminate ringing on busy (sei option to
no)
and press ENTER.
7.
When finished press ESCAPE twice.
8.
Type y to accept changes,
n
to reject them, or r to resume editing and press ENTER to end.
Station Features Programming 7-51