Programming instructions

7.2.26
Consoles Installed (DSS/BLF Consoles Installed)
Description:
Use this procedure to assign DSS/BLF consoles to a station and to identify the ports that the
consoles occupy.
NOTE: Before you can assign a console and nume the console port with this programming step,
you must use the Section 7.4 programming procedure to identify the type of console and
the station port to which it is assigned.
Programming: 1. Press CONTROL T for main menu.
2. From main menu, select station and press ENTER.
3. From station menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name of station being programmed
and press ENTER.
5. Type item number for the consoles installed and press ENTER.
6. Press SPACE bar for desired setting and press ENTER.
7. Type item number for console ports and press ENTER.
8. Type the port number for console ports (l-480,0 for none-up to four allowed)
and press ENTER.
9. When finished, press ESCAPE twice.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps 4-10 for each station or press ESCAPE to end.
7.2.27
Programming Port (Database Programming Station)
Description: This procedure assigns limited database programming ability to a station.
NOTE: You must ensure that there is an LCD speakerphone connected to the station port that
you choose with this feature.
Programming: 1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name of station and press ENTER.
5. From station programming menu, type item number for the feature and press ENTER.
6. Press SPACE bar for desired setting and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 level for each station or press ESCAPE to end.
Station Features Programming 7-53