Programming instructions

Uvll66-123
7.2.32
Softkeys Setup (Interactive Button Suppotfj
Description:
The system provides support for interactive buttons on LCD LJ
Troduct codes
of 7010s and 7016s (all revisions), and 7700s (revision H P:
interactive
buttons and the associated expanded displays provide quick, ,_
:I features and
straight-forward button programming without the need for 21
..ult, the
interactive button support is disabled; therefore, you must tzk
.JII to enable it.
When you enable them, the system overrides any previous m;;,
. buttons with
this new assignment. If, after you have enabled the support,
LO button map
any of the interactive buttons to another assignment, the no
3 effect at that
button. In addition, the system will clear the remaining two k
%e interactive
button support. If you replace any of these LCD speakerphon,
lay telephone,
the system recognizes it as such and does not assign interacti-
:ce the system
allows you to enable interactive buttons with station programrr
not provide a
means for assigning interactive buttons with the button maPr.
: you have
enabled the interactive buttons, you can look at the button assig
utton mapping
procedure, and note that the system identifies them as SOFT ,
T3.
Programming:
1. Press CONTROL T to return to the main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and p:--’
4. Type personal intercom number or the previously assigne,
5. From station programming menu, type the item number for
6. Press SPACE BAR to enable interactive buttons (set option :
7. When finished press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume L
‘TIER.
ENTER.
zss ENTER.
.NTER to end.
$m7nli”g 7-57