Programming instructions

/M/66-323
DXP Plus Programming hstructions
7.2.33
/ST Hold Confirmation
Description:
Industry-standard telephones sound a special hold confirmation tone when their users place
calls on hold. Prior to this software release, these telephones returned to intercom dial tone
when their users placed calls on hold. The system defaults with the special confirmation tone
enabled; however, you can disable the feature if you wish. The confirmation tone is three 80 ms.
on -80 ms. off tone bursts repeated at 800 ms. intervals. See Section 7.2.35 for other IST
programming considerations.
Programming: 1. From main menu, select stations and press ENTER.
2. From stations menu, select station programming and press ENTER.
3. Type personal intercom number or previously assigned name for IST and press ENTER.
4. From the station programming menu, type item number for feature and press ENTER.
5. Press SPACE bar to enable or disable feature (yes = enable, no = disable)
and press ENTER.
6. Press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
8. Repeat steps 3-7 for each station or press ESCAPE to end.
7.2.34
Transfer Ring Cadence
Description: A telephone user can select the ringing cadence that announces a transferred line call. They
have two choices as follows: Ring cadence one provides a 2 sec. on-4 sec. off tone. Ring
cadence two provides a 0.5 sec.-
5Ssec. off tone. Ring cadence one is available to telephone
users as a default and they can select the other one as they need it. Use this procedure to select
the default cadence for each system station.
Programming: 1.
2.
3.
4.
5.
6.
7.
8.
9.
Press CONTROL T for main menu.
From main menu, select stations and press ENTER.
From stations menu, select station programming and press ENTER.
Type personal intercom number or previously assigned name and press ENTER.
From station programming menu, type item number for feature and press ENTER.
Press SPACE bar to select cadence choice for default.
When finished, press ESCAPE twice.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
Repeat steps 4-8 for each station or press ESCAPE to end.
7-58 Station Features Programming