Programming instructions
DXP Plus Programming Instructions
/M/66-123
IST
Ringing Patterns
Description:
You can program the ringing pattern for either IST ring mode one or IST ring mode two. Mode
one causes a two-second ring phase while mode two causes a shorter one second ring phase.
For this feature to function properly, insure that the industry-standard telephone interface board
contains firmware revision 2C or higher
Programming:
1.
Press CONTROL T for main menu.
2.
From main menu, select system and press ENTER.
3.
From system menu, select system parameters and press ENTER.
4.
Select IST ring mode from the system parameters and press ENTER.
5.
Press SPACE bar to toggle between mode 1 (default) and mode 2.
6. When finished, press ENTER.
7.
Press ESCAPE twice to end.
IST Ring Frequency
Description:
The system will allow you to set a ring frequency of 25 Hz for international applications or set a
ring frequency of 21 Hz for domestic applications. Choose a setting that matches the ring
frequency of the installed ring generator.
Programming:
1.
Press CONTROL T for main menu.
2.
From main menu, select system and press ENTER.
3.
From system menu, select system parameters and press ENTER.
4.
Select IST ring frequency from the system parameters and press ENTER.
5.
Press SPACE bar to toggle between choices of 21 Hz and 25 Hz.
6, When finished, press ENTER.
7.
Press ESCAPE twice to end.
7.2.36
Ring
Back On Busy
Description:
With this feature enabled, when someone calls another telephone and the calling party is busy
on an outside line, the caller hears a ring back tone-not a busy tone. When the caller is using a
non-display telephone he or she has no means of knowing the busy status of the called party.
(Remember, LCD speakerphones display called party status- for details on this feature, see
Section
7.1.39.)
With this feature disabled, callers hear a busy tone instead of a ring back tone
when they call a party who is busy on an outside line. You must enable this feature if you plan
to enable the feature titled Automatic Attendant
Tranger
On Busy (see Section
145.3
for
details).
Programming:
1.
Press CONTROL T to return to the main menu.
2.
From main menu, select stations and press ENTER.
3.
From stations menu, select station programming and press ENTER.
4.
Type personal intercom number or previously assigned name and press ENTER.
5.
From station programming menu, type the item number for feature and press ENTER.
6.
Press SPACE BAR to choose setting(
no = busy tone, yes = ring back tone)
and press ENTER.
7.
When finished press ESCAPE twice.
8.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER to end.
Station Features Programming 743