Manualshelf

Programming instructions

ManualsBrandsVertical ManualsConsumer electronicsDXP Plus
141142143144145146147148149150
lMl66-123
DXP
Pius
Programming
hstrwdions
Day 1 Ring
Descriptions
Use this procedure to choose the line ports that you want to ring at stations during the day 1
ringing mode time period.
Refer to the paragraph titled,
Day 1, Day 2, and Night Ringing Begin
and End Times,
to set the beginning and ending times of this ringing.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, type item number for hunt groups and press ENTER.
4. Type number for hunt group (l-64) and press ENTER.
5. For new hunt groups, type pilot number for hunt group.
6. Type item number for options, and press ENTER.
7. Type item number for day 1 ring and press ENTER.
8. Press CONTROL E for edit.
9. Type a for add or r for remove and press ENTER.
10. Type line port number l-240 (type as n,nn,nnn or n-nnn) and press ENTER.
11. When finished, press ESCAPE three times
12.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
13. Repeat steps 4-12 for each station or press ESCAPE to end.
Day 2 Ring
Description:
Use this procedure to choose the line ports that you want to ring at stations during the day 2
ringing mode time period. Refer to the paragraph titled,
Day I, Day 2, and Night Ringing Begin
and End Times,
to set the beginning and ending times of this ringing.
Programming:
1
a
Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, type item number for hunt groups and press ENTER.
4. Type number for hunt group (l-64) and press ENTER.
5. For new hunt groups, type pilot number for hunt group.
6. Type item number for options, and press ENTER.
7. Type item number for day 2 ring and press ENTER.
8.
Press CONTROL E for edit.
9. Type a for add or r for remove and press ENTER.
10. Type line port number l-240 (type as n,nn,nnn or n-nnn) and press ENTER.
11. When finished, press ESCAPE three times.
12. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
7-72 Station Features Programming