Programming instructions

8.1.3 Line Disable
Description:
Take a line port out of service because of defect or other reason using this programming choice.
Programming: 1 D Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From line menu, select line programming and press ENTER.
4. Type line port l-240 or previously assigned nameand press ENTER.
5. From line programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each line port or press ESCAPE to end.
8.1.4 Music Or Tone On Hold
Description.=
With this feature enabled, the system will supply music, tone bursts or other audio information
to callers while they are on hold. The music or information source is external to the common
equipment and is customer supplied. The system will accept two music sources. You can use
one source for this feature and the other source for the background music feature discussed in
Section 7.1.3. When the system supplies tone bursts to callers while they are on hold, it sounds
two .l second long tone bursts separated by a .l second interval of silence. It repeats this tone
burst sequence every 5 seconds.
Programming.= 1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From the lines menu, select line programming and press ENTER.
4. From line programming menu, type item number for feature and press ENTER.
5. Press SPACE bar for feature setting.
6. When finished, press ESCAPE twice,
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
8. Repeat steps 4-7 for each line or press ESCAPE to end.
8.1.5
Privacy Release (Automatic Privacy)
Description:
Assign privacy release to a line so that a user can press the privacy button on his or her
telephone and change a private line into a non-private one as needed. When a line is private, a
station user has exclusive use of it during a call. Also refer to the Section 7.3 procedure to map
a privacy button on the user’s telephone.
Programming: 1. Press CONTROL T for main menu
2. From the main menu, select lines and press ENTER.
3. From the lines menu, select line programming.
4. Type line port number (l-240) or name and press ENTER.
5. From the line programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for desired feature setting.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each line port or press ESCAPE to end.
8-4 Line Features Programming