Programming instructions

Call Announce
Description:
This feature, when enabled, allows tie line callers from outside the system to voice announce
incoming calls to the DXP Plus station after they hear an alert tone. You must also arrange the
DXP Plus system to respond to voice announce intercom calls.
Programming:
Refer to Section 8.7.2.
Dialing Mode
Description:
Program the tie line to match either a DTMF tone or a rotary (pulse) dialing line as supplied by
the central office (CO).
Programming:
Refer to Section 8.7.2.
Toll Groups
Description:
You must identify the tie lines that you do not want users to use when they dial toll restricted
numbers. Do this by first assigning the tie lines to toll groups and then assigning those toll
groups to the restricted number. There are 32 toll groups available for line assignment. Assign
one, several, or all lines to any desired toll group or combination of toll groups as needed. See
Section II for complete toll restriction programming details.
Programming:
Refer to Section 8.7.5.
DTMF Level
Description: Adjust the audio level of the tie line’s DTMF signals to a low (-5 db), medium (0 db), or high
(+3 db) setting. Certain sites may require a higher db level to over come line conditions that
could interfere with reliable dialing.
Programming:
Refer to Section 8.7.2.
DISA
Description:
Enable or disable DISA capability on the tie line.
Programming: Refer to Section 8.7.2.
DISA Voice Options
Description: Use the DISA Voice Options 1 through 4 to select digital voice announce (DVA) message
levels. For example, selecting DISA voice option 2 will cause welcome greeting 2, day main
menu 2, night main menu 2, recall no answer 2, and recall busy 2 prompts to play whenever a
DISA-configured tie line is covered by DVA. Refer to Section 14.3 for complete DVA
programming details.
Programming:
Refer to Section 8.7.2
Line Features Programming 8-27