Programming instructions

/M/66-123
DXP Pius Programming Instructions
10.1
SMDALSMDR Parameters
IO. 1. I
Dial Time Limit
Description.-
Program the amount of time that the system ignores for dialing purposes e The system does not
cost dialing time when it records the time of a call for costing purposes. Refer to Section 12.5
for related call costing information.
Programming:
1. Press CONTROL T for main menu.
2. From the main menu, select SMDA/SMDR and press ENTER.
3. From SMDA/SMDR programming menu, select SMDBrISMDR parameters
and press ENTER.
4. From SMDA/SMDR parameters menu, type item number for feature and press ENTER.
5. Press SPACE BAR for feature value.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER to end.
10.1.2
Answer Time Limit
Description:
Program the amount of time that the system waits before beginning to cost a cab. This time
allows for a call to ring and be answered before being costed. Refer to Section 62.5 for related
call costing information
Programming: 1.
2.
3.
4.
5.
6.
7.
Press CONTROL T for main menu.
From main menu, select SMDA/SMDR and press ENTER.
From SMDA/SMDR programming menu, select SMDAISMDR parameters
and press ENTER.
From SMDA/SMDR parameters menu, type item number for feature and press ENTER.
Press SPACE BAR for feature value.
When finished, press ESCAPE twice.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER to end.
IO. 1.3
SMDR Print Parameter
Description:
When you turn on the SMDR with this programming action, the system provides continuous
printout of system-wide station call activity as it is collected. You can arrange for the printout to
include the cost of each reported call or to report the calls without the costing information
Refer to Section 12.5 for related call costing information
Programming: 1. Press CONTROL T for main menu
2. From main menu, select SMDAKMDR and press ENTER.
3. From SMDAISMDR programming menu, select SMDAISMDR parameters
and press ENTER.
4. From SMDA/SMDR parameters menu, type item number for feature and press ENTER.
5. Press SPACE BAR for feature value.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER to end.
1 O-2 CaN Costing and SMDABMDR Programming