Programming instructions

IMl66- 123
DXP Plus Programming lnstruetions
10.1.7
Account Code Length
Description:
An account code can be a minimum of three digits or a maximum of 16 digits. Use this
procedure to set the amount of account code digits. See Section 60.3 for further account code
programming details.
NOTE If you change the account code length you will delete
all currently programmed account codes.
Programming:
1 D Press CONTROL T for main menu.
2. From main menu, select SMDA/SMDR and press.
3. From SMDA/SMDR menu, select SMDA/SMDR parameters and press ENTER.
4. From SMDAGMDR parameters menu, type item number for feature and press ENTER.
5. Type the account digit amount (3-16).
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER to end.
IO. 1.8
SMDA Attendant Delete
Description:
Use this programming feature to provide the system attendant with the ability to delete SMDA
records from the system memory.
Programming: 1. Press CONTROL T for main menu.
2. From main menu, select SMDAKMDR and press ENTER.
3. From SMDhVSMDR programming menu, select SMDA/SMDR parameters
and press ENTER.
4. From SMDA/SMDR parameters menu, type item number for feature and press ENTER.
5. Press SPACE BAR for feature value.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER to end.
Operation: INTERCOM +k # 0 +K 827
IO. 1.9
SMDLVSMDR Printer Port
Description:
Use this programming feature to determine which serial data port the system will route its
generated SMDAKMDR through.
Programming: 1 0 Press CONTROL T for main menu.
2. From main menu, select SMDA/SMDR and press ENTER.
3. From SMDA/SMDR programming menu, select SMDA/SMDR parameters
and press ENTER.
4. From SMDA/SMDR parameters menu, type item number for feature and press ENTER.
5. Type data port number (1-18) and press ENTER.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER to end.
10-6 Call Cosfing and SMDABMDW Programming