Programming instructions

DXP Plus Programming Instructions
lMi66-123
Reviewing General
Programming Considerations
Since the programming procedure is menu driven, you should consider all of the following points.
l The menu presents a list of selections for your consideration. Each selection differs in content and
requires a different response.
l When you respond to each selection, it either causes the system to present a further breakdown of
selections or causes a particular programming action to take place.
l Menu lines prompt you for the required response and, where appropriate, will repeat prompts to
allow programming of more than one device without you having to make another menu selection.
l All of the menus operate in a similar manner. They differ in only the required response that you
must make.
l Some menus contain more than one page. On these menus, you can press and hold the CONTROL
key while you type the
N key to display the next page (or type P to display the previous page).
l Each prompt requires a response followed by a Carriage Return (RETURN). A more common label
for this control on most PC keyboards is ENTER.
l Most menu responses usually consists of a one-, two-, or three-digit number or a string of numbers
(or alpha-numeric characters when programming names and messages). Successive entries are
separated by a space or a comma (n n n or n,nn,nnn) while blocks of numbers are indicated by
hyphen (n-nnn).
l Should programmers introduce a numbering conflict while renumbering a feature dialing code, the
system will prompt them to remove the conflict. They may have to renumber several features to
completely clear any conflicting numbers.
General Programming Considerations 2-1