Programming instructions

DXP Plus Programming Instructions
lMl66-123
12.4.1 Route Table Warning Tone
Description:
You can arrange for the system to sound a warning tone in the user’s handset or station speaker
if ARS routes a call on any route other than the least expensive, This tone indicates that the
system has chosen a more expensive line group. If a station user hears this tone, he or she
should hang up and try again later.
Programming: To enable route select warning tone, ’
1. Press CONTROL T for main menu.
2. From the main menu, select TOLL/ARS and press ENTER.
3. From the TOLL/ARS menu, select route table and press ENTER.
4. Type l-32 to select route table to be programmed and press ENTER.
5. Type l-6 to select route number and press ENTER.
7. Press TAB key to position cursor at route status column.
8. Press SPACE BAR for feature value and press ENTER.
9. Press ESCAPE.
10. Repeat steps 5 through 9 for all six routes.
11. When finished, press ESCAPE.
12. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
13. Repeat steps 4-12 for all route tables.
14. Press ESCAPE twice to return to main menu.
Automatic Route Selection Programming 12-5