Programming instructions
DXP Plus Programming Instructions
lMl66-123
14.2
Tracker Paging System Programming
The Tracker Paging System is a paging device that interfaces a DXP
Plus
system with Tracker pagers (personal
pager devices). When the Tracker Paging System is installed, you must use the following programming routines
to establish proper communications between the system and individual Tracker pager users.
14.2. I
Programming Tracker Paging System Options
Description:
Tracker Paging System options consist of selecting the serial port that you will use for
connecting the base station, enabling or disabling Tracker Paging System operation, and
selecting PC Attendant 1 through 4.
Programming:
1.
Press CONTROL T for main menu.
2.
From main menu, select Peripherals and press ENTER.
3.
From peripherals menu, select Tracker and press ENTER.
4.
From Tracker menu, select Options and press ENTER.
5.
Enter Tracker Paging System base station number (1 through 4) and press ENTER.
6.
From tracker unit options menu, select the serial port where the Tracker base station will be
connected (1 through 18) and press ENTER.
7.
Toggle the second field with the SPACE bar to enable/disable the Tracker Paging System
option and press ENTER.
8.
Toggle the third field with the SPACE bar to select PC Attendant 1 through 4 (or none) and
press ENTER.
9.
When finished, press ESCAPE twice.
10.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Press ESCAPE to end.
NOTE: After you have enabled the Tracker paging system and saved your programming
selections, the DXP Plus system connects with the Tracker base station and displays the
following message:
Initializing TRACKER unit, please wait. . .
If the Tracker base station is correctly installed and operational, the DXP Plus system
then displays the following message:
Installation complete, TRACKER is on line
G
however, the Tracker base station is not installed
orfails
to connect, the DXP Plus
system displays the following message:
Installation error, verify programming or installation
Peripheral Devices Programming 14-5