Programming instructions

lM166-123 DXP Plus Programming Instructions
14.4.5
Mapping PC Attendant Position Function Keys
Description:
The DXP Plus adds programmable function keys to the PC Attendant Position. The
programmable features are in addition to the fixed features currently provided by function keys
Fl through F12. You can assign a different feature to each function key from the list of
functions shown in Section 7.3.1.
Programming:
1. Press CONTROL T for main menu,
2. From main menu, select stations and press ENTER,
3. From stations, select PC attendant and press ENTER,
4. Type attendant number (14) and press ENTER,
5. From PC attendant menu, select button mapping and press ENTER,
6. Press CONTROL E for button map of function keys and press ENTER,
7. Type button number (Ll-L12) and press ENTER,
8. Type mnemonic (type ? for a description of mnemonic if you
need it) for desired feature and press ENTER,
9. Repeat steps 7 and 8 until all feature button are programmed,
10. When finished, press ESCAPE twice,
Il. Type y to accept changes, n to reject them, or r to resume editing and press ENTER,
12. Press ESCAPE to end.
Operation:
To access the programmed functions on the PC Attendant Position, the user must press and hold
the CTRL button while pressing the desired function button on the keyboard.
14-20 Peripheral Devices Prc9gramming