Programming instructions

DXP Plus Programming Instructions
IMl66-123
14.5
Voice Mail Programming
After connecting an voice mail system to the DXP Plus system, program the DXP Plus to operate properly with it
using the procedures detailed below. They are presented here in a typical order of progression but you can
perform them in any order that is convenient.
14.5.1
Arranging Station Ports For Voice Mail Use
Description:
After you or your installer has connected voice mail ports to the system station ports through the
appropriate interface devices (for example, the VMI-X interface device used with analog station
ports, the ATI-D-IPI’ interface device used with the digital station ports, or the DXIST station
board used with industry-standard telephone ports), you must identify the station ports where
these devices are connected.
Programming: 1. Press CONTROL T for main menu.
2. From the main menu, select stations and press ENTER.
3. From station menu, select phone types and press ENTER.
4. Type row number for station port type
(ExecuTech = analog, DigiTech = digital, IST = industry standard)
and press ENTER.
5. Type row number for device connected to station port (VMI-X or ATI-D-WI)
and press ENTER. (This step not required for IST.)
6. Type number of station port (1480) and press ENTER.
7. Repeat steps l-6 for each station port used to interface with the voice mail system.
Peripheral Devices Programming 14-21