Programming instructions

5. I
Reviewing The Programming Progression
Program the system in the sequence
shown in the following flow diagram.
Determine system programmmg
parameters. Record them for future
reference.
From Windows, enter
terminal emulation modf
and use it to enter
DXP Plus programming
Perform MASTER CLEAR procedure.
(Initial installation procedure only!
Thls action
initializes system prior to programming and clears
all memory.)
Perform SYSTEM CLOCK
procedure*. (Sets time
displayed at LCD
speakerphones to current
time.)
* Set the system clock even ifno
LCD speakerphones are used.
If analog telephones or consoles are employed, use
TELEPHONE TYPES procedure to identify
telephone types to station ports. If digital stations
are installed, they automatically identify themselves
to ports at power up; however, if they are not
installed until after power up,use TELEPHONE
TYPES procedure to identify them to the ports.
Program System, Line,
Station COS, and Station
Features in any order desired
and on an as needed basis.
5-2 Terminal Emulation Programming